Fluid Transfer Products • Chem Resist https://www.chemresist.com/fluid-transfer/ Mon, 15 Jul 2024 11:16:14 +0000 en-GB hourly 1 https://www.chemresist.com/wp-content/uploads/2021/08/cropped-favicon-chem-resist-80x80.png Fluid Transfer Products • Chem Resist https://www.chemresist.com/fluid-transfer/ 32 32 Munsch CM+ Magnetically Coupled Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/munsch-cm-magnetically-coupled-chemical-pump/ Thu, 25 May 2023 12:05:49 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=11936 The post Munsch CM+ Magnetically Coupled Chemical Pump appeared first on Chem Resist.

]]>

Unique features

The QUICKFIT and MagPull easy maintenance systems provide quick and easy access without having to remove the pump.

QUICKFIT

The pump casing can be removed from the remaining pump unit within a few minutes while remaining connected to the discharge and suction-side piping.

The QUICKFIT unit can be replaced with the casing staying in line, allowing for the pump to be restarted with a minimum of downtime.

MagPull

Routine maintenance? No problem with the MagPull system! The bearing bracket can be removed from the remaining pump unit with the piping connections remaining connected.

The pump will continue to be hermetically sealed while the bearing bracket and outer magnet assembly are being inspected and serviced.

Chemical Process Pump Performance Data

  • Pump capacity: up to 200 m³/h
  • Total differential head: up to 90 m
  • Operating temperature [t]: up to 180 °C
  • Operating pressure [p]: up to 16 bar

Features and Benefits

  • Replacaeable, thick-walled volute casing with minimum thickness of 10mm without weak welds or joints
  • Innovative single-piece impeller-shaft construction designed for optimal operating reliability
  • Thermocontrol pump monitoring for continuous measurement, with sensors located directly at point of heat dissipation
  • Internal circulation provides perfect plain bearing lubrication, with additional external lubrication options
  • Easy to assemble, replace and maintain within minutes
  • Additional protection for staff and plant with pressure-resistant secondary seals up to 10 bar

Technical Data

  • Models
  • Materials
  • Performance Charts
  • Optional Extras

25-25-125
25-25-160
40-25-125
40-25-160
50-32-125
50-32-160
50-32-200
65-40-200
65-50-125
65-50-160
80-50-200
80-65-160
100-65-160

  • Main material: Silicon carbide
  • O-rings: FFPM, FPM and EPDM
  • Gaskets: TFM 1600, PTFE

1.450 (50hz)
1.750 (60hz)
2.950 (50hz)
3.550 (60hz)

  • Dry run-proof bearings
  • Temperature and vibration monitoring of anti-friction bearings
  • Pressure monitoring of secondary seal
  • Electronic monitoring of outer magnet assembly
  • Thermocontrol – temperature monitoring of process liquid

Suggested Applications

Thanks to the hermetically sealed design, the CM+ is ideal for sensitive areas with high hazard potential – whether for health or the environment. Common applications include:

  • The chemical industry
  • Electrolysis plants
  • Pharmaceuticals
  • Electroplating plants
  • The environmental sector

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch CM+ Magnetically Coupled Chemical Pump appeared first on Chem Resist.

]]> Level Controllers and Indicators for Level Switches https://www.chemresist.com/fluid-transfer/level-controllers-and-indicators-for-level-switches/ Fri, 03 Sep 2021 15:45:39 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=2568 The post Level Controllers and Indicators for Level Switches appeared first on Chem Resist.

]]>
  • LC40-42
  • LC90-92
  • LC10
  • LC11
  • LC05-06
Series LC40-42
Classification General purpose
Type Controller
Application Pump, valve or alarm actuation; auto fill or empty with alarms
Mount Rail mount
Strobe Alert —
Indication LED
Supply 120 / 240 VAC
Input (1-3) switches
Contact (1-3) SPDT relays
Enclosure NEMA 1
Datasheet Click here
Series LC90-92
Classification Isolation
Type Controller
Application Pump, valve or alarm actuation; auto fill or empty with alarms
Mount Rail mount
Strobe Alert —
Indication LED
Supply 120 / 240 VAC
Input (1-2) switches
Contact (1 or 2) SPDT relays
Enclosure NEMA 1
Datasheet Click here
Series LC10
Classification General purpose
Type Controller
Application Pump, valve or alarm actuation
Mount Switch-Pak or sensor mount
Strobe Alert Option
Indication LED
Supply 120 / 240 VAC
Input (1) switch
Contact (1) SPDT relay
Enclosure NEMA 4X
Datasheet Click here
Series LC11
Classification General purpose
Type Controller
Application Auto fill or empty
Mount Smart Trak mount
Strobe Alert Option
Indication LED
Supply 120 / 240 VAC
Input (2) switches
Contact (1) SPDT latching relay
Enclosure NEMA 4X
Datasheet Click here
Series LC05-06
Classification General purpose
Type Junction box
Application Wiring term-ination
Mount Switch-Pak, Smart Trak or sensor mount
Strobe Alert Option
Indication —
Supply —
Input (1-4) switches
Contact —
Enclosure NEMA 4X
Datasheet Click here

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Level Controllers and Indicators for Level Switches appeared first on Chem Resist.

]]> Level Controllers and Indicators for Level Transmitters https://www.chemresist.com/fluid-transfer/level-controllers-and-indicators-for-level-transmitters/ Fri, 03 Sep 2021 15:41:33 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=2566 The post Level Controllers and Indicators for Level Transmitters appeared first on Chem Resist.

]]>
  • LI55
  • LC52
  • LI25-2
  • LI25-1
  • LI40
Series LI55
Classification General purpose
Type Controller
Application Display + control
Mount Panel mount
Display 6-digit LED
Supply 85-265 VAC (available in VDC)
Contact (0, 2, 4) SPDT relay
Enclosure NEMA 4X faceplate
Datasheet Click here
Series LC52
Classification General purpose
Type Controller
Application Display + control
Mount Rail mount
Display 3.5-digit LED + bar graph
Supply 120 / 240 VAC
Contact (2) SPDT relays
Enclosure NEMA 1
Datasheet Click here
Series LI25-2
Classification Intrinsically safe
Type Indicator
Application Display only
Mount Panel mount
Display 5-digit LCD
Supply 9-30 VDC loop
Contact —
Enclosure NEMA 4X faceplate
Datasheet Click here
Series LI25-1
Classification General purpose
Type Indicator
Application Display only
Mount Panel mount
Display 5-digit LCD
Supply 9-30 VDC loop
Contact —
Enclosure NEMA 4X faceplate
Datasheet Click here
Series LI40
Classification General purpose
Type Indicator
Application Display only
Mount Panel mount
Display 6-digit LCD
Supply EchoPod sensor
Contact —
Enclosure NEMA 4X faceplate
Datasheet Click here

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Level Controllers and Indicators for Level Transmitters appeared first on Chem Resist.

]]> Level Switches https://www.chemresist.com/fluid-transfer/level-switches/ Fri, 03 Sep 2021 15:40:37 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=2564 The post Level Switches appeared first on Chem Resist.

]]>
  • AX1X
  • AX13
  • AXXX
  • AX23
  • LU10
  • LZ12
  • LV10
  • LO10
Series AX1X
Classification Intrinsically safe or general purpose
Media Liquids
Type Single-point package
Application Bulk storage, IBC or drum, neutralization tank
Function Level switch
Max. length 10′ (3m)
Supply 12-36 VDC
Contact (1-4) SPST relay or SPDT reed
Rating 60 VA or 15 VA
Enclosure NEMA 4X (IP65)
Termination Conduit
Mount 2″ NPT (1 1/2″ G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 150 PSI (10 bar)
Material PP / PVDF
Datasheet Click here
Series AX13
Classification General purpose
Media Liquids
Type Single-point package
Application Bulk storage, IBC or drum, neutralization tank
Function Level shut off
Max. length 10′ (3m)
Supply 120/240 VAC
Contact (1-4) SPST relay or SPDT reed
Rating 250 VAC @ 10A
Enclosure NEMA 4X (IP65)
Termination Conduit
Mount 2″ NPT (1 1/2″ G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 150 PSI (10 bar)
Material PP / PVDF
Datasheet Click here
Series AXXX
Classification Intrinsically safe or general purpose
Media Liquids
Type Multi point package
Application Day tank, skid or machine, cooling tower, waste sump, process tank
Function Level switches
Max. length 10′ (3m)
Supply 12-36 VDC
Contact (1-4) SPST relay or SPDT reed
Rating 60 VA or 15 VA
Enclosure NEMA 4X (IP65)
Termination Conduit
Mount 2″ NPT (G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure Atm
Material PP
Datasheet Click here
Series AX23
Classification General purpose
Media Liquids
Type Multi point package
Application Day tank, skid or machine, cooling tower, waste sump, process tank
Function Automatic fill or empty
Max. length 10′ (3m)
Supply 120/240 VAC
Contact (1) SPDT latching relay
Rating 250 VAC @ 10A
Enclosure NEMA 4X (IP65)
Termination Conduit
Mount 2″ NPT (G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure Atm
Material PP
Datasheet Click here
Series LU10
Classification Intrinsically safe
Media Liquids
Type Ultrasonic sensor
Application Chemical
Function Level switch
Max. length —
Supply 12-36 VDC
Contact (1) SPST relay
Rating 32 VDC (0.5A max)
Enclosure NEMA 6 (IP68)
Termination Cable
Mount 3/4″ NPT (G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 150 PSI (10 bar)
Material PP / PFA
Datasheet Click here
Series LZ12
Classification General purpose
Media Liquids
Type Vibration sensor
Application Wastewater
Function Level switch
Max. length —
Supply 12-36 VDC
Contact (1) SPST relay
Rating 60 VA (1A max)
Enclosure NEMA 6 (IP68)
Termination Cable
Mount 3/4″ NPT (G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 150 PSI (10 bar)
Material PP-Ryton
Datasheet Click here
Series LV10
Classification General purpose
Media Liquids
Type Buoyancy sensor
Application Water
Function Level switch
Max. length —
Supply —
Contact (1) SPST reed
Rating 15 VA (0.25A max)
Enclosure NEMA 6 (IP68)
Termination Cable
Mount 3/4″ NPT (Rp)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 25 PSI (10 bar)
Material PP / PVDF
Datasheet Click here
Series LO10
Classification General purpose
Media Liquids
Type Optic sensor
Application Secondary containment
Function Leak detection
Max. length —
Supply 12-36 VDC
Contact (1) SPST relay
Rating 60 VA (1A max)
Enclosure NEMA 6 (IP68)
Termination Cable
Mount 3/4″ NPT (G)
Temperature -40º F. (-40º C.) to 176º F. (80º C.)
Max. pressure 150 PSI (10 bar)
Material PP / PFA
Datasheet Click here

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Level Switches appeared first on Chem Resist.

]]> Level Transmitters https://www.chemresist.com/fluid-transfer/level-transmitters/ Fri, 03 Sep 2021 15:40:20 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=2562 The post Level Transmitters appeared first on Chem Resist.

]]>
  • LU20
  • LU23-29
  • LU80-84
  • DL10
  • DL14
  • DL24
Series LU20
Classification Intrinsically safe
Media Liquids
Application Bulk storage, day tank, waste sump
Condensation Minimal
Range 18′ (5.4m))
Output 4-20 mA
Display Yes
Configuration Push button
Termination Conduit
Mount 2″ NPT (G)
Temperature -4º F. (-20º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here
Series LU23-29
Classification General purpose
Media Liquids
Application Bulk storage, day tank, waste sump
Condensation Minimal
Range 32.8′ (10m)
Output 4-20 mA
Display No
Configuration WebCal software
Termination Cable
Mount 1″, 2″ NPT (G)
Temperature -4º F. (-20º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here

 

Series LU80-84
Classification General purpose
Media Liquids
Application Bulk storage, day tank, waste sump
Condensation Minimal
Range 32.8′ (10m)
Output 4-20 mA
Display Yes
Configuration Push button
Termination Conduit
Mount 1″, 2″ NPT (G)
Temperature -4º F. (-20º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here
Series DL10
Classification General purpose
Media Liquids
Application Chemical feed, skid or machine, IBC or drum
Condensation Minimal
Range 49.2″ (1.25m)
Output 4-20 mA
Display No
Configuration WebCal software
Termination Cable
Mount 1″ NPT (G)
Temperature 20º F. (-7º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here
Series DL14
Classification General purpose
Media Liquids
Application Chemical feed, skid or machine, IBC or drum
Condensation Minimal
Range 49.2″ (1.25m)
Output 4-20 mA + (4) SPST relays
Display No
Configuration WebCal software
Termination Cable
Mount 1″ NPT (G)
Temperature 20º F. (-7º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here
Series DL24
Classification General purpose
Media Liquids
Application Day tank, skid or machine
Condensation Minimal
Range 9.8′ (3m)
Output 4-20 mA + (4) SPST relays
Display No
Configuration WebCal software
Termination Cable
Mount 1″ NPT (G)
Temperature 20º F. (-7º C.) to 140º F. (60º C.)
Max. pressure 30 PSI (2 bar)
Trans. material PVDF
Datasheet Click here

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Level Transmitters appeared first on Chem Resist.

]]> Munsch TPC Vertical Cantilever Pump https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tpc-vertical-cantilever-pump/ https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tpc-vertical-cantilever-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-tpc-vertical-cantilever-pump/ The post Munsch TPC Vertical Cantilever Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 600 m³/h
  • Total differential head: up to 65 m
  • Operating temperature: 0°C up to +100 °C
  • Operating pressure: up to 10 bar
  • Diameter of discharge nozzle: DN 25 up to DN 150
  • Motor rating: up to 45 kW
  • Solids concentration: up to 5%
  • Maximum allowable particle size: up to 18 mm

Features and Benefits

  • Pump casing, casing cover and suspension pipe made of solid plastic with ample abrasion allowance to give maximum compatibility corrosive liquids
  • The column pipe and discharge flange can be rotated to virtually any position
  • Standard vertical setting depth can be varied in steps of 100mm
  • Impeller available as closed and semi-open
  • Anti-friction bearing is installed in the lantern accommodating high loads even under part load conditions
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-160
  • 65-40-200
  • 65-40-250
  • 80-50-200
  • 80-50-250
  • 100-65-200
  • 125-80-200
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PE-UHMW and PVDF
  • Shaft: Stainless steel (coated)
  • Secondary seal: FPM

View the performance chart

  • Suction strainer
  • Suction pipe up to a length of 1600 mm
  • Motor overload switch

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch TPC Vertical Cantilever Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tpc-vertical-cantilever-pump/feed/ 0 Munsch TNP Vertical Pump https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/ https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-tnp-vertical-pump/ The post Munsch TNP Vertical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 110 m³/h
  • Total differential head: up to 45 m
  • Operating temperature [t]: 0°C up to +100 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 32 up to DN 80
  • Motor sizes up to IEC motor size up to 132

Features and Benefits

  • Pump casing, casing cover and suspension pipe made of solid plastic to give maximum compatibility corrosive liquids
  • The column pipe and discharge flange can be rotated to virtually any position
  • Standard vertical setting depth can be varied in steps of 100m, intermediate depth also available
  • Impeller available as closed and semi-open
  • • Anti-friction bearing integrated into the bearing lantern allows high loads to the shaft
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-160
  • 65-40-200
  • 65-40-250
  • 80-50-200
  • 80-50-250
  • 100-65-200
  • 125-80-200
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PE-UHMW and PVDF
  • Shaft: Stainless steel (coated)
  • Plain bearing: Silicon carbide
  • Secondary seal: FPM

See performance charts

  • Suction pipe up to a length of 1600 mm
  • Suction strainer
  • External flushing of plain bearing
  • Motor overload switch

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch TNP Vertical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/feed/ 0 Munsch NPC Mammut Centrifugal Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-npc-mammut-centrifugal-pump/ The post Munsch NPC Mammut Centrifugal Pump appeared first on Chem Resist.

]]>

Performance Data

  • Mammut Pump capacity: 1000 m³/h up to 5000m³/h
  • Total differential head: up to 100m
  • Operating Temperature: 0°C up to +100 °C
  • Solids concentration: up to 10% by vol.
  • Particle size: up to 15 mm
  • Motor rating: up to 1MW

Features and Benefits

  • Designed for applications with corrosive and solid-loaded media at flows of 1000 m³/h up to 5000 m³/h and high delivery heads
  • Manufactured in materials to give virtually universal resistance
  • Cast iron armour and synthetic pump casing withstand pressures of up to 10 bar
  • Volute casing has wall thickness of 30mm
  • Impeller designed to give high efficiency through low NPSH requirements
  • During testing safe rotation in the wrong direction as the impeller is fixed to the shaft
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Models and Max Driving Pressure
  • Materials
  • Performance Charts
  • 300-250-315
  • 300-250-400
  • 500-400-700
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PVDF and PFA
  • Shaft: Stainless steel (coated)
  • Seal rings: Ekasic (advanced silicon carbide)

300-250-315
300-250-400
500-400-700

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NPC Mammut Centrifugal Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/feed/ 0 Munsch CS Standardised Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-cs-standardised-chemical-pump/ The post Munsch CS Standardised Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 200 m³/h
  • Total differential head: up to 90 m
  • Operating temperature [t]: -20°C to +180 °C
  • Operating pressure [p]: up to 16 bar
  • Solids content: up to 5 Vol.-%
  • Particle size: up to 5 mm
  • Diameter of discharge nozzle: DN 25 up to DN 65
  • Drive rating [P]: up to 30 kW

Features and Benefits

  • Impeller types: closed, semi-open or vortex designs
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • One mechanical seal fits all pump types
  • Flexible flushing connections that can be retrofitted at any time
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Wetted parts available in thick-walled polypropylene, PVDF or universally chemically resistant PFA

Munsch pumps

  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-50-125
  • 65-50-160
  • 65-40-200
  • 80-65-160
  • 80-50-200
  • Main material: Polypropylene, PVDF or PFA
  • Impeller: closed, half-open and vortex (depending on size)
  • Shaft seal: Munsch REA mechanical seal, single and double seal options
  • Bearings: Silicon carbide
  • Spacer can: PFA

See performance chart

  • Temperature monitoring
  • Various flushing options
  • Casing drain

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch CS Standardised Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/feed/ 0 Munsch NP Standardised Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-np-standardised-chemical-pump/ The post Munsch NP Standardised Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 1200 m³/h
  • Total differential head: up to 100 m
  • Operating temperature [t]: -20°C up to +110 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 25 up to DN 250
  • Drive rating [P]: up to 200 kW

Features and Benefits

  • Robust metal armour accommodates all allowable system pressures and piping loads
  • Impeller types: closed and semi-open
  • Back pull-out design
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Single or double mechanical seals available
  • Flexible flushing connections that can be retrofitted at any time.
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Optimum seal chamber geometry without dead flow pockets ensures continuous liquid movement
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-160
  • 50-32-160
  • 50-32-200
  • 65-40-200
  • 65-40-250
  • 65-40-315
  • 65-50-160
  • 80-65-160
  • 80-50-200
  • 80-50-250
  • 80-50-315
  • 100-65-200
  • 100-65-250
  • 100-65-315
  • 125-80-200
  • 125-80-250
  • 125-100-200
  • 125-100-250
  • 125-100-315
  • 150-125-250
  • 150-125-315
  • 200-150-400
  • 200-200-400
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller:  Polypropylene, PE-UHMW and PVDF
  • Shaft: Steel (plastic coated)
  • Mechanical seal: Silicon carbide

See performance charts

  • Base plate
  • Levelling bolts as an alternative to concrete pads
  • Coupling with / without spacer sleeve
  • Coupling guard
  • Priming pot
  • Thermosiphon buffer system
  • Quench tank
  • Motor overload switch
  • Casing drain

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NP Standardised Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/feed/ 0